方法一:
添加路由
route add -net 192.168.0.0/24 gw 192.168.0.1
route add -host 192.168.1.1 dev 192.168.0.1
刪除路由
route del -net 192.168.0.0/24 gw 192.168.0.1
add 增加路由
del 刪除路由
-net 設置到某個網段的路由
-host 設置到某臺主機的路由
gw 出口網關 IP地址
dev 出口網關 物理設備名
增加默認路由:route add default gw 192.168.0.1
默認路由一條就夠了
實例:route add -net 10.192.139.0/24 gw 10.192.154.65 dev eth1
route -n 查看路由表
方法二:
添加路由
ip route add 192.168.0.0/24 via 192.168.0.1
ip route add 192.168.1.1 dev 192.168.0.1
刪除路由
ip route del 192.168.0.0/24 via 192.168.0.1
add 增加路由
del 刪除路由
via 網關出口 IP地址
dev 網關出口 物理設備名
增加默認路由
ip route add default via 192.168.0.1 dev eth0
via 192.168.0.1 是我的默認路由器
查看路由信息
ip route
保存路由設置,使其在網絡重啟后任然有效
在/etc/sysconfig/network-script/目錄下創建名為route- eth0的文件
vi /etc/sysconfig/network-script/route-eth0
在此文件添加如下格式的內容 : 192.168.1.0/24 via 192.168.0.1
重啟網絡驗證
/etc/rc.d/init.d/network中有這么幾行:
# Add non interface-specific Static-routes.
if [ -f /etc/sysconfig/static-routes ]; then
grep “^any” /etc/sysconfig/static-routes | while read ignore args ; do
/sbin/route add -$args
done
fi
也就是說,將靜態路由加到/etc/sysconfig/static-routes 文件中就行了。
如加入:route add -net 11.1.1.0 netmask 255.255.255.0 gw 11.1.1.1
則static-routes的格式為: any net 11.1.1.0 netmask 255.255.255.0 gw 11.1.1.1